Graco Therm-O-Flow® Model T5 Hot Melt Adhesive Supply Unit
**Used Sales Demonstration Models in Nearly Like New Condition with Approx. 3-4 Hours of Total Use! Will most likely have some blemishes and surface contamination. Comes with 30 Day Return Policy.**
The Model T5 is the smallest hot melt dispensing tank in our line up and is ideal for many low to medium volume applications. However, with a 12 Lb tank capacity and a 12 Lb Per Hour melt rating, the Model T5 is certainly no toy! With it's easy to configure analog style control panel and direct plugin connections, the Model T5 can be setup and in operation in less than an hour!
Technical Specifications
Hose/Applicator Capacity = Up to (1) Hose, 16 Ft Total Length
Tank Capacity = 12 Lbs, Teflon Coated
Melt Rating = 12 Lbs/Hour
Application Temperature = Up to 410º F.
Temperature Control Accuracy = ±2%
Pump Type = Precision Gear Pump, Adjustable from 0 to 300 psi
Motor Type = Constant Speed AC
Voltage = 115 VAC, or 230 VAC, 50/60 Hz, Single Phase
Circuit Breaker Rating = 15 Amp
Empty Weight = 41 Lbs
Dimensions = 15.5" Long x 10.5" Wide x 12.5" High
Electrical Marks = C E
Warm-up Time = Approx. 30 Mins
Browse by Category
